Struct zerocopy::byteorder::U32

#[repr(transparent)]
pub struct U32<O: ByteOrder>(_, _);

A 32-bit unsigned integer stored in O byte order.

U32 is like the native u32 type with two major differences: First, it has no alignment requirement (its alignment is 1). Second, the endianness of its memory layout is given by the type parameter O.

A U32 can be constructed using the new method, and its contained value can be obtained as a native u32 using the get method, or updated in place with the set method. In all cases, if the endianness O is not the same as the endianness of the current platform, an endianness swap will be performed in order to uphold the invariants that a) the layout of U32 has endianness O and that, b) the layout of u32 has the platform's native endianness.

U32 implements FromBytes, AsBytes, and Unaligned, making it useful for parsing and serialization. See the module documentation for an example of how it can be used for parsing UDP packets.

Methods

impl<O: ByteOrder> U32<O>

pub const ZERO: U32<O>

The value zero.

This constant should be preferred to constructing a new value using new, as new may perform an endianness swap depending on the endianness and platform.

pub const MAX_VALUE: U32<O>

The maximum value.

This constant should be preferred to constructing a new value using new, as new may perform an endianness swap depending on the endianness O and the endianness of the platform.

pub fn new(n: u32) -> U32<O>

Constructs a new value, possibly performing an endianness swap to guarantee that the returned value has endianness O.

pub fn get(self) -> u32

Returns the value as a primitive type, possibly performing an endianness swap to guarantee that the return value has the endianness of the native platform.

pub fn set(&mut self, n: u32)

Updates the value in place as a primitive type, possibly performing an endianness swap to guarantee that the stored value has the endianness O.

Trait Implementations

impl<O: ByteOrder> FromBytes for U32<O> where
    PhantomData<O>: FromBytes, 

fn only_derive_is_allowed_to_implement_this_trait() where
    Self: Sized, 

impl<O: ByteOrder> AsBytes for U32<O>

fn only_derive_is_allowed_to_implement_this_trait() where
    Self: Sized, 

fn as_bytes(&self) -> &[u8]

Get the bytes of this value.

fn as_bytes_mut(&mut self) -> &mut [u8] where
    Self: FromBytes, 

Get the bytes of this value mutably.

impl<O: ByteOrder> Unaligned for U32<O> where
    PhantomData<O>: Unaligned, 

fn only_derive_is_allowed_to_implement_this_trait() where
    Self: Sized, 

impl<O: ByteOrder> Display for U32<O>

fn fmt(&self, f: &mut Formatter) -> Result

Formats the value using the given formatter.

impl<O: ByteOrder> Debug for U32<O>

fn fmt(&self, f: &mut Formatter) -> Result

Formats the value using the given formatter.

impl<O: PartialEq + ByteOrder> PartialEq<U32<O>> for U32<O>

fn eq(&self, other: &U32<O>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &U32<O>) -> bool

This method tests for !=.

impl<O: ByteOrder> PartialEq<U32<O>> for [u8; 4]

fn eq(&self, other: &U32<O>) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use] fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<O: ByteOrder> PartialEq<[u8; 4]> for U32<O>

fn eq(&self, other: &[u8; 4]) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use] fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<O: Eq + ByteOrder> Eq for U32<O>

impl<O: Copy + ByteOrder> Copy for U32<O>

impl<O: ByteOrder> AsRef<[u8; 4]> for U32<O>

fn as_ref(&self) -> &[u8; 4]

Performs the conversion.

impl<O: ByteOrder> AsMut<[u8; 4]> for U32<O>

fn as_mut(&mut self) -> &mut [u8; 4]

Performs the conversion.

impl<O: ByteOrder> From<U32<O>> for [u8; 4]

fn from(x: U32<O>) -> [u8; 4]

Performs the conversion.

impl<O: ByteOrder> From<[u8; 4]> for U32<O>

fn from(bytes: [u8; 4]) -> U32<O>

Performs the conversion.

impl<O: ByteOrder> Octal for U32<O>

fn fmt(&self, f: &mut Formatter) -> Result

Formats the value using the given formatter.

impl<O: ByteOrder> Binary for U32<O>

fn fmt(&self, f: &mut Formatter) -> Result

Formats the value using the given formatter.

impl<O: ByteOrder> LowerHex for U32<O>

fn fmt(&self, f: &mut Formatter) -> Result

Formats the value using the given formatter.

impl<O: ByteOrder> UpperHex for U32<O>

fn fmt(&self, f: &mut Formatter) -> Result

Formats the value using the given formatter.

impl<O: Clone + ByteOrder> Clone for U32<O>

fn clone(&self) -> U32<O>

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl<O: Default + ByteOrder> Default for U32<O>

fn default() -> U32<O>

Returns the "default value" for a type.